Circuit Breaker Boots — Lever-Actuated Front-Panel Mounted Boots – IP66/68 Rated
HEXSEAL® and E-SEEL® sealing boots for lever-actuated style circuit breakers are molded from APM’s proprietary RUBRGLAS™ … a transparent high tear-strength silicone rubber which won’t yellow or discolor. Each boot is supplied with APM’s patented self-sealing SEELSKREWS® to insure total sealing integrity for the breaker, its panel cutout, and the boot mounting holes. Front panel mounted boots are also supplied with a plated, steel frame. These tough, flexible boots provide a dust-tight and watertight seal without compromising breaker operation or position status viewing.
Boot: APM-RUBRGLAS (transparent silicone rubber) conforms to ZZ-R-765, Class III Grade 50. Frame: steel.
Screws: SEELSKREWS (self-sealing screws), stainless steel with silicone rubber O-ring.
HEXSEALS: -94°F to +400°F (-70°C to +204°C)
E-SEELS: -80°F to +400°F (-62°C to +204°C)
Dust tight and splashproof.
10,000 actuations (minimum)
Excess of 25 years
Salt spray, weather, UV, sunlight, ozone, corona and most acids.
Most HEXSEALS meet MIL-DTL-5423 (see selection charts)
UL & ULC Recognized to UL Std. 50
*APM’s policy is to manufacture our HEXSEAL® sealing boots as defined by the requirements of MIL-Spec DTL-5423 which we regard as the standard for the switch, circuit breaker and potentiometer industry. These requirements were formulated based on our original patent.
- Mounting screws are supplied in lengths shown unless otherwise specified.
- New sizes and types of RUBRGLAS-SEELS are being added regularly. Please request other types and styles as required.